|
PoE adapter not included |
Dual-band, 802.11ac Wave 2 access point with a 2+ Gbps aggregate throughput rate that can be plugged into any non-AC wall outlet.
Note: PoE+ required for PoE passthrough
In-Wall HD
The Access Point In-Wall HD (UAP IW HD) is a dual-band, 802.11ac WiFi access point that can be plugged into any non-AC wall outlet. The UAP IW HD can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands, which allows it to support over 200 concurrently connected clients. This access point is powered by PoE* and is equipped with (5) GbE RJ45 ports, including one for configurable 48V PoE passthrough. The UAP IW HD is the perfect plug-and-play access point for those looking for an easy-to-use, inconspicuous way to broaden their wireless coverage. It can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
- 5 GHz (4x4 MU-MIMO) band with a 1.733 Gbps throughput rate
- 2.4 GHz (2x2 MIMO) band with a 300 Mbps throughput rate
- 200+ concurrent client capacity
- Powered by PoE*
- (5) GbE RJ45 ports, including (1) for configurable PoE passthrough (Port 1)
Detailed Analytics with the UniFi Controller
Use the configurable reporting and analytics to manage large user populations and expedite troubleshooting while also monitoring UniFi APs and analyse the surrounding RF environment.
Scalable Enterprise Wi-Fi Management
The sleek and elegant UniFi In-Wall HD AP transforms an Ethernet wall connection into a simultaneous, dual-band 802.11ac Wi-Fi Access Point with 4x4 MIMO technology.
The UniFi IW HD AP is the first UniFi 802.11ac Wave 2 AP using the in-wall design. Combining the performance increases from MU-MIMO technology and the use of 4x4 spatial streams, the UniFi IW HD AP delivers up to 125% greater performance* than a typical Wave 1 AP.
* Actual numbers may vary depending on environmental and installation conditions.
802.11ac Wave 2 MU-MIMO (Multi-User, Multiple Input, Multiple Output) technology allows a Wave 2 AP, such as the UniFi IW HD AP, to communicate with multiple clients at the same time – significantly increasing multi-user throughput and overall user experience.
The UniFi IW HD AP can be conveniently powered by an 802.3af or 802.at compliant switch. Ubiquiti recommend powering your UniFi devices with a UniFi PoE Switch (sold separately).
Unlimited scalability: build wireless networks as big or small as needed. Start with one (or upgrade to a multi-pack) and expand to thousands while maintaining a single unified management system.
Secondary Gigabit Ethernet
Four ports are available for bridging – one of which offers PoE passthrough when the AP is powered by an 802.3at PoE+ switch.
Easy Mounting
The back plate offers multiple mounting holes for use with a variety of 1-gang electrical wall boxes.
Know more about your network than ever before
Easily accessible through any standard web browser and the UniFi app (iOS or Android™), the UniFi Controller software is a powerful software engine ideal for high-density client deployments requiring low latency and high uptime performance.
139.7 x 86.7 x 25.75 mm
210 g
(5) 10/100/1000 Ethernet Ports
Reset
PoE / PoE+
44 to 57 VDC
UniFi Switch (PoE)
48V Passthrough (Pins +1, 2; -3, 6)
11W
With PoE Passthrough - 23W*
* Requires PoE+ switch
2.4 GHz - 23 dBm
5 GHz - 26 dBm
(2) Single-Port, Single-Polarity Dual-Band Antennas
2.4 GHz - 1.8 dBi Each
5 GHz - 3.4 dBi Each
(2) Single-Port, Dual-Polarity, Single-Band Antennas
5 GHz - 6 dBi Each
1-Gang Electrical Wall Box (Not Included)
-10 to 60° C
5 to 95% Non condensing
CE, FCC, IC
802.11 a/b/g/n/r/k/v/ac/ac-wave2
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF
Up to 8 per Radio
802.1Q
Per-User Rate Limiting
Supported
Supported
Supported
Voice, Video, Best Effort, and Background
200+
6, 9, 12, 18, 24, 36, 48, 54 Mbps
1, 2, 5.5, 11 Mbps
6, 9, 12, 18, 24, 36, 48, 54 Mbps
6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80)
58 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2, VHT 160)